BondTite 1101

BondTite 1101

Primers 0

BondTite 1101 is an epoxy primer which exhibits excellent adhesion and sealing properties on steel and concrete.

TECHNICAL DESCRIPTION

BondTite 1101 is a 100% solids, Low Modulus, two-component, AHC (Advanced Hybrid Cycloaliphatic) epoxy primer which exhibits excellent adhesion and sealing properties on steel or concrete. The coating’s uses include priming of concrete floors, manholes, sumps, and other areas in preparation for over-coating. BondTite 1101 can also be used as a clear sealer, but will yellow under sunlight. In addition to the Standard Cure formulation, BondTite 1101 is also available in an Extended pot life formulation (BondTite 1101-EP).

APPLICATION DATA SUMMARY

See Application Instructions for complete information on surface preparation, equipment, environmental conditions, application procedures, and safety precautions. For conditions outside the specifications or limitations described, contact Wolverine Coatings Corporation for details.

SURFACE PREPARATION

Coating performance is directly related to the quality and degree of surface preparation. Prior to overcoating, all surfaces must be clean, dry, undamaged, and free of all contaminants. For more specific information, consult the surface preparation section contained in the Application instructions.

SAFETY PRECAUTIONS

Read the Safety Data Sheet carefully before use. Safety precautions in the SDS should be carefully followed during storage, handling and use. Improper use and handling can be hazardous to health and cause fire or explosion.

BondTite 1101 - Wolverine Coatings Corporation: Epoxy Coatings Manufacturer, Spartanburg, SC